Nanjing FiveMen Machine CO., LTD
Our quality policy: quality first, technology first, integrity management, customer satisfaction Our business strategy: Rather than go slow, go well Core concept: People-oriented, continuous
Add to Cart
Continuous Waste Fuel Oil Separator Marine ZYDH470 ISO Certification
Introduction:
Zydh can separate rapid succession of solid liquid and liquid liquid ,which is a kind of vertical centrifuge. A rotary drum is install in the upper end of vertical shaft, the driving device driven by a motor to rotate at high speed. Drum have a set of a butterfly shaped parts mutually overlapped together. Have a very small space left between the disc and disc. Suspension pour into drum by feeding tube which is located center of the drum.When the slurry flows past the clearance between the disc, solid particles in centrifuge sinking to the sediment is formed on the disc. Sediment falls of the disc along the sliding surface of the disc and accumulate in the drum at the largest diameter. The separation of the liquid exhaust drum from the liquid outlet .The function of the disc is to short the distance between the settlement of solid particles or liquid droplets and to expand the area of settlement of the drum.Because the installation disc in the drum and greatly improves the separators’ production capacity
Techincal Parameters :
| Model |
Capacity (L/h) for input(coconut milk) |
Basket Diameter (mm) | Rotation Rate of Drum (r/m) | Separation factor | Power (KW) |
Slag discharge way |
Weight (kg) |
Dimension (mm*mm*mm) |
| ZYDH270 | 300 | 270 | 7200 | 6950 | 4 | automatic | 550 | 865*645*1100 |
| ZYDH315 | 500 | 315 | 6500 | 7000 | 5.5 | automatic | 650 | 900*600*1150 |
| ZYDH385 | 600 | 385 | 6500 | 7500 | 7.5 | automatic | 750 | 1100*1050*1250 |
| ZYDH430 | 800 | 430 | 6000 | 8050 | 11 | automatic | 900 | 1200*950*1400 |
| ZYDH470 | 1200-1500 | 470 | 5800 | 8500 | 18.5 | automatic | 1100 | 1250*1000*1550 |
Main parts:
Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor
(1). Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate.
(2) The main strengthen parts of Roller body and Roller cover use 2Cr13, and the other parts of contacted materials such as Disc all use 316L
(3) The Stainless steel cover use SUS304
(4) The base use casting steel, coating does the same way as ship bottom.