Nanjing FiveMen Machine CO., LTD
Our quality policy: quality first, technology first, integrity management, customer satisfaction Our business strategy: Rather than go slow, go well Core concept: People-oriented, continuous
Add to Cart
KYDH Disc Continuous Mineral Oil And Fuel Oil Centrifuge Separator
---------------------------------------------------------Introduction--------------------------------------------------------------------------
KYDH series marine oil and fuel oil centrifuge separator are mainly applied in:
1. the purification and clarification of the diesel, light fuel oil, heavy fuel oil
2. other mineral oil.used to remove the water, moisture, mechanical impurities
3. some harmful substances of the oil.
KYDH series separator is mainly applied in the purification and clarification of the diesel, light fuel oil, heavy fuel oil and other mineral oil, to
remove the water, moisture, mechanical impurities and some harmful substances of the oil. This model is automatic slag type, high separation
efficiency, no need to disassemble to slag. It can be automatic controlled according to requirement which greatly reduce the labor intensity of the
operating. This machine by the accurate calibration balancing, little vibration, can be long-running and operated safety and reliable.
---------------------------------------------------------Feature--------------------------------------------------------------------------
1, High speed and high separation factor
2, continuous operation
3, running balance, simple operation, low oil consumption
4, Common Start control box and Siemens PLC control box with LED touch screen
5, Self-discharging , self-cleaning
6, Full-automatic vibration detector can monitor the vibration strength value of the centripetal pump at any time.
7. Can be automatic controlled according to requirements which greatly reduce the lab orintensity of the operating.
---------------------------------------------------------Structure--------------------------------------------------------------------------
Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor
(1). Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate.
(2) Usually, the material uses SUS304. But if the material is corrosion, the main strengthen parts of Roller body and Roller cover use dual-phase
steel, and the other parts of contacted materials such as Disc all use 304 stainless steel.
(3) The base use casting steel, coating does the same way as ship bottom.
---------------------------------------------------------Technical Parameters ------------------------------------------------------------
| No. | Model | Capacity (l/h) | Drum diameter (mm) | Drum speed | Motor Power (KW) | Discharge way | Separator factor | Weight(kg) | Size(mm*mm*mm) |
| 1 | KYDH204SD-23 | 1500 | 230 | 6930 | 2.2 | Manual | 6170 | 245 | 850*625*985 |
| 2 | KYDH204SD-23 | 2000 | 270 | 7200 | 4 | Automatic | 6950 | 550 | 865*645*1100 |
| 3 | KYDH206SD-23 | 3000 | 315 | 6500 | 5.5 | Automatic | 7000 | 650 | 900*600*1150 |
| 4 | KYDH207SD-23 | 4000 | 385 | 6500 | 7.5 | Automatic | 7500 | 750 | 1100*1050*1250 |
| 5 | KYDH209SD-23 | 5000 | 430 | 6000 | 11 | Automatic | 8050 | 900 | 1200*950*1400 |
| 6 | KYDH470/ZYDH470 | 8000 | 470 | 5800 | 18.5 | automatic | 8500 | 1100 |
1250*1000*1550 |
| 7 | KYDH211SD-23 | 10000 | 500 | 5500 | 18.5 | automatic | 8500 | 1200 | 1250*1100*1550 |
---------------------------------Separation conditions and actual productivity of mineral oil --------------------------
| Item | Fuel oil | Lube oil | |||||||||||||||||
| viscosity/(mm2/s | Distillate Fuel Oil | residual fuel oil | Brand oil | purified oil | Steam turbine oil | ||||||||||||||
| 1.9~5.5 | 5.5~24 | 60 | 80 | 120 | 180 | 380 | 460 | 600 | 100~120 | 61.2~74.8 | |||||||||
| 40°C | 50°C | 40°C | 40°C | ||||||||||||||||
| Density/ (kg/mm3)(20°C) | <900 | 900~991 | 880~900 | <900 | |||||||||||||||
| separation temperature/°C | 20 | 40 | 75 | 80 | 90 | 98 | 80 | 75 | |||||||||||
| The ratio of actual productivity and rated capacity % | 130 | 100 | 70~75 | 60~65 | 55~60 | 45~50 | 35~40 | 25~30 | 20~25 | 50~60 | 25~30 | 80~85 | |||||||
| Note: the ratio of actual productivity and rated capacity is 100% | |||||||||||||||||||
